Skip to content P7X22 Centrifugal Power Sifters Standard Design Features 304 stainless steel working parts in product contact areas Product contact stainless steel surfaces to be 2B finish Welds in product contact to be continuous and ground to 80 grit minimum Welds not in product contact to be intermittent, ground to 80 grit and gaps filled with Devcon Mild steel surfaces one (1) coat primer and one (1) coat white epoxy Flanged inlet Worm type auger to control product in feed Adjustable tension restricted end sieve frame One (1) compliment of customer specified nylon sieves Four-blade adjustable paddle assembly Self-aligning outboard bearing Bolted and gasketed dust-tight inspection/cleaning doors 2 HP, 1800 RPM, TEFC standard duty motor 3/60/230-460V, drive and guard Direct drive with the motor, reducer and guard with a 2:1 reduction for a paddle speed of approx. 870 RPM Controls, wiring, stand and installation by customer To rent a stock item call 716.934.2611 or fill out and submit the form below.