Skip to content C-62 Continuous Duplex Mixer Standard Design Features Solid twin shaft paddle type agitators with one shaft right hand and one shaft left hand One shaft extended for drive Lip type shaft seals Single standard inlet Standard flanged bottom outlet discharge Closed cell neoprene gaskets Counter-rotating gear connecting drive, oil bath lubrication with oil tight enclosed guard 7.5 HP, TEFC, 1800 RPM, 3/60/230-460 motor Drive Class I application, complete with shaft mounted gear reducer for a mixer speed of 300 RPM Standard spray bar Construction Details 48 Fully adjustable and replaceable solid paddles with machined washers to lock paddles to shafts Four (4) self-aligning flange bearings Bolted flat covers All mild steel construction Fully welded tank, 7 Gauge tank thickness All exterior and exterior surfaces to be mill finish Product contact welds are continuous and ground smooth and flush Non-product contact welds are intermittent and wire brush cleaned, gaps filled with Devcon All steel surfaces to be painted with one primer coat and one top coat (S. Howes standard blue) To rent a stock item call 716.934.2611 or fill out and submit the form below. 
