Skip to content MCD-4 Continuous Duplex Mixer Standard Design Features Solid twin shaft paddle type agitators – one shaft right hand and one shaft left hand One shaft extended for drive Nominal capacity 1 ton per hour Double lip type shaft seals Closed cell neoprene gaskets Standard flanged bottom outlet discharge Counter-rotating gear connecting drive, oil bath lubrication with oil tight enclosed guard 3 HP, 1800 RPM, 3/60/230-460 hollow bore gearmotor Drive Class I application, complete with shaft mounted gear reducer for a shaft speed of 175 RPM Bolted inlet & discharge transitions Some units equipped with flat covers Construction Details 46 Fully adjustable and replaceable solid paddles with machined washers to lock paddles to shafts Three (3) 2-bolt flange bearings 304 Stainless steel construction in product contact areas Fully welded tank One (1) hinged & clamped domed cover with viewports and spray nozzle ports One (1) hinged cover with flanged inlet Solid bar shafting finish details 7 Gauge tank thickness 10 Gauge cover thickness All exterior surfaces to be ground to 36 grit finish All interior surfaces to be 2B (100-120 grit) finish Product contact welds are continuous and ground to finish Non-product contact welds are intermittent and gaps filled with food grade Devcon All steel components to be painted with one primer coat and one top coat (white) To rent a stock item call 716.934.2611 or fill out and submit the form below.