P7X22 Centrifugal Power Sifters

  • 304 stainless steel working parts in product contact areas
  • Product contact stainless steel surfaces to be 2B finish
  • Welds in product contact to be continuous and ground to 80 grit minimum
  • Welds not in product contact to be intermittent, ground to 80 grit and gaps filled with Devcon
  • Mild steel surfaces one (1) coat primer and one (1) coat white epoxy
  • Flanged inlet
  • Worm type auger to control product in feed
  • Adjustable tension restricted end sieve frame
  • One (1) compliment of customer specified nylon sieves
  • Four-blade adjustable paddle assembly
  • Self-aligning outboard bearing
  • Bolted and gasketed dust-tight inspection/cleaning doors
  • 2 HP, 1800 RPM, TEFC standard duty motor 3/60/230-460V, drive and guard
  • Direct drive with the motor, reducer and guard with a 2:1 reduction for a paddle speed of approx. 870 RPM
  • Controls, wiring, stand and installation by customer

To rent a stock item call 716.934.2611 or fill out and submit the form below.