S. Howes

C-62 Continuous Duplex Mixer

C-62 Continuous Duplex Mixer

Available : 2

Construction Details
  • All mild steel construction
  • Fully welded tank, 7 Gauge tank thickness Finish Details
  • All exterior and exterior surfaces to be mill finish
  • Product contact welds are continuous and ground smooth and flush
  • Non-product contact welds are intermittent and wire brush cleaned, gaps filled with devcon
  • All steel surfaces to be painted with one primer coat and one top coat (S. Howes standard blue) Standard Design
  • Solid twin shaft paddle type agitators
    one shaft right hand and one shaft left hand
  • One shaft extended for drive
  • 48 Fully adjustable and replaceable solid paddles with machined washers to lock paddles to shafts
  • Four (4) self-aligning flange bearings
  • Lip type shaft seals
  • Bolted flat covers
  • Closed cell neoprene gaskets
  • Single standard inlet
  • Standard flanged bottom outlet discharge
  • Counter-rotating gear connecting drive, oil bath lubrication with oil tight enclosed guard Standard Components
  • 7.5 HP, TEFC, 1800 RPM, 3/60/230-460 motor
  • Drive Class I application, complete with shaft mounted gear reducer for a mixer speed of 300 RPM
  • Standard spray bar

To Rent a Stock Item Call 716.934.2611 or fill out the form below.

  • This field is for validation purposes and should be left unchanged.