S. Howes

ES Sanitary Blender ES-100

ES Sanitary Blender ES-100

Available : 1

Construction Details
  • 304 Stainless steel construction in product contact areas
  • Mild steel construction in non-product contact areas
  • S. Howes standard flanged double ribbon agitator
Standard Components
  • Drive Class I application, complete with shaft mounted direct drive gearmotor for a mixer speed of 92 RPM at 60 Hz
  • 1 HP, TEFC, 1800 RPM, 3/60/230-460 TEFC inverter duty motor
  • Spherical roller pillow block bearings for shaft support
  • OSHA compliant bearing and shaft guards
Finish Details
  • Product contact surface finish, 2B (80 grit) finish
  • Exterior surface finish, uniform scotch brite
  • Interior welds to be continuous, no cracks or crevices, ground flush and polished to 80 grit finish
  • Exterior welds to be continuous, no cracks or crevices, ground smooth & blended with scotch brite finish
  • All exterior steel components to be painted with one primer coat and one top coat (food grade epoxy paint, white)
  • All welding to be done as TIG welds
Optional Components Included
  • Rotating mechanical shaft seals
  • Seals mounted to end plate and sealed with RTV
  • The seal require 3 – 5 psig compressed air purge.
  • Two triple blade chopper style intenifiers
  • Replaceable, interchangeable blades
  • 1/2 HP, TEFC, 1800 RPM, 3/60/230-460 TEFC standard duty motor
  • Portable carbon steel support stand
Standard Design Features
  • Mixer tank inside dimensions of 12” wide x 20″ long
  • Mixer is furnished with welded heads for leak-free operation, welds ground to 1/8” minimum radius, no crevice contamination
  • Flanged journal design (with no exposed threads) for top removal of cylinder for ease of cleaning.
  • Center discharge with 4” manual plug valve
  • Hinged & clamped flat cover
  • Lift-out safety grating
  • Magnetic limit switch mounted to safety grating, 120 VAC, not wired
  • Food grade white neoprene strip gasket

To Rent a Stock Item Call 716.934.2611 or fill out the form below.

  • This field is for validation purposes and should be left unchanged.